Home / Our Products / Parts for hydraulic fracturing manifolds

Parts for hydraulic fracturing manifolds

Support
We answer your questions
Swivel joints

    kshs3_2Swivel joints, manufactured by Ural Manifolds Plant, provide a high resource and economic efficiency when operating high pressure manifolds, and are used in various well maintenance operations in hydraulic fracturing technologies.

 

  • The design of swivel joint was developed taking into account changes in the geometry inside the body of the product, which helps to increase the life of each part.
  • An innovative internal coating was used, which in the aggregate of the presented solutions allows to extend the life of the product by 30-40%.
  • Material: special steel with selected chemical composition, workpiece - forging, contributing to ensure the required declared product life
  • Modification of swivel joint is available in various styles with thread and nut of swivel joint

Technical characteristics:

Diameter

50,8 mm, 76,2 mm, 101,6 mm

Operating pressure

Up to 105 MPa

Medium temperature

from + 60 to - 40 degrees

Application

Hydraulic fracturing, cementing, acid treatment

Implementation

In different styles in three different planes

HIGH PRESSURE VALVES 2”, 3”, 4” (70, 105 MPa)

КВД пробковый1 High pressure valve protects equipment the injection line or annulus of the wellhead, and  protects against overloads when the pressure rises above the set pressure

 

Technical characteristics:

 Diameter

   50,8 mm, 76,2 mm, 101,6 mm

Operating pressure, MPa (kgf / cm²)

70, 105 (1050)

Set pressure, MPa (kgf / cm²) -
automatic

From 1,0 to 105,0 (from 10 to 1050)

 Operating fluid

 

  Petroleum products with sand (proppant), water with sand, gels, hydrochloric acid solutions

Manifold pipe with quick-disconnect joint

  Труба манифольда1

Manifold pipe for high pressure systems. Designed for assembly of pipeline sections

high pressure during hydraulic fracturing and other technological operations, associated with the injection into the reservoir.

 

Technical characteristics:

Diameter

50,8 мм, 76,2 мм, 101,6 мм

Operating pressure, MPa (kgf / cm²)

70, 105 (1050)

Pipe length, mm

2500, 3050, 4000

Operating fluid

Petroleum products with sand (proppant), water with sand, gels, hydrochloric acid solutions

Connecting thread, mm

 Сn.Tr 136,5×7,2 (HU 3" FIG 2002)

Nut of high pressure quick-disconnect joint 2”, 3”, 4” (70, 150 Mpa)

Гайка БРС1

2 ", 3" and 4 “ high pressure quick-disconnect joint nut (70, 105 MPa) - designed for quick and safe connection of mating elements in manifold systems and other equipment (manifold pipes, valves, high pressure valves, etc.)

 

 

 

T-fiiting Dy 50 (2”, 3”) 70 MPa

тройникТ тип2 T-shaped  fititing Dy x Dy = 50 x 50 mm - a type of fittings, a connecting piece pipeline with three holes, allowing you to connect additional branches to the main pipe.

 

 

Technical characteristics:

Diameter

55 mm, 73 mm

Operating pressure, MPa (kgf / cm²)

70

Medium temperature

-60 до +40 С

Operating fluid

Petroleum products with sand (proppant), water with sand, gels, hydrochloric acid solutions

Implementation

6 different types, with different number and arrangement of connecting positions.

Connecting thread

CnTr 104,78 x 8,467

U-fiiting Dy50 (2”) 70 MPa

тройник Утип2 U-shaped fitting Dy x Dy = 50 x 50 mm - a type of fittings, three-hole pipe fitting allowing connect additional branches to the main pipe.

 

 

Technical characteristics:

Diameter

55 mm, 73 mm

Operating pressure, MPa (kgf / cm²)

70

Medium temperature

-60 до +40 С

Operating fluid

Petroleum products with sand (proppant), water with sand, gels, hydrochloric acid solutions

Implementation

6 different types, with different number and arrangement of connecting positions.

Connecting thread, mm

CnTr 104,78 x 8,467

The angle between the axes of each branch

120 degrees

Equipment delivery procedure
1
Parameter negotiation
We select products according to the technical specifications, coordinate implementation
2
Contract signing
We coordinate and sign a supply contract, deliver products in an agreed time
3
Maintenance during the warranty period
We accompany products and answer your questions during the warranty period.
Calculate
Name*
Telephone*
E-Mail*
File upload
maximum: 1
Leave a request
Leave a request
Please, fill in this form and we will contact you to make an appointment. Or call us +7 (351) 214-14-40
Форма заявки
Name: *
Name
E-mail: *
Phone number: *
Phone number
Contacts
Address:
Chelyabinsk, Russia
Any questions?